TR-600 GPS Tracker General FAQ

1.) Q: What GPS chipset does the TR-600 use?
SiRF Star III

2.) Q: How many Inputs/Outputs does the TR-600 have?
SOS Input 1 (Negative Trigger)
Ignition (ACC) (Positive Trigger)
Digital Input 1 (Negative Trigger)
Digital Input 2 (Negative Trigger)
Digital Input 3 (Positive Trigger)
Digital Output 1 (300mA) (Negative trigger)
Digital Output 2 (300mA) (Negative trigger)
Digital Output 3 (300mA) (Negative trigger)
Analog Input Port 1 (0 - 28V)
Serial Port 1 (115200bps)

3.) Q: What do the LED status mean?
Power Status (Red) Permanently on : Device ON
GPS Status (Yellow) Permanently off : GPS off
Fast blinking (every 1s) : GPS Not Fix
Slow blinking (every 3s) : GPS Fix
GSM Status (Green) Permanently off : GSM off
Fast blinking (every 1s) : Network search / Not registered / turning off
Slow blinking (every 3s) : Registered full service
Permanently on : a call is active

4.) Q: What GSM Module does the TR-600 use?
Telit GE865 Quad Band 850/900/1800/1900 MHz

5.) Q: What are the dimensions of the TR-600?
98 mm x 65mm x 22mm (3.86" x 2.56" x 0.87")

6.) Q: Does the TR-600 do Data Logging?
Yes, it can store up to 50,000 points.

7.) Q: Can I use a backup battery?
Yes, internal 820 mAh Lion Battery or external lead acid battery (12V/24V)

8.) Q: What type of GPS and GSM antenna?
GPS - SMA type connector Active antenna (3.3V - 3.8V) (included) GSM - SMA type connector (included)

9.) Q: What protocols does the TR-600 use?
SMS and GPRS (TCP/UDP/HTTP)

10.) Q: Can I do Over The Air (OTA) firmware updating?
Yes.